please wait


M.E. Engineering Design is a full-time 2-year post-graduate course in Engineering design program. The eligibility of the course is B.Tech/B.E degree with an aggregate of 60% and above from a recognized university listed under UGC/AIU. The program is an integrated study of developing and designing of engineering products.

Among the top colleges who offer the program of M.E Engineering Design are as follows:

  • Birla Institute of Technology and Science (BITS Pilani) - Rajasthan
  • Einstein College of Engineering -Tirunelveli
  • Anna University - Chennai
  • Maharaja Engineering College (MEC) - Coimbatore
  • Sri Krishna College of Engineering and Technology – Tamil Nadu

The average course fee ranges from INR 90,000 to 9 Lacs.

Candidates are supposed to clear the entrance examination held at various state and national level such as GATE/IIT-JEE, etc. However, some colleges may hold their own entrance examinations for admission. They will also have to qualify Group Discussion (GD) and Personal Interview (PI). The program enables candidates to polish their skills and gain an advance insight into the subject which can help them avail for future research and study.

Candidates who possess effective communication skills, evaluative and innovative abilities, who have the hunger to get an advanced study of the subject are deemed suitable for the course. Providing advancement in their future career prospects, this course instills in candidates the principles of designing engineering products. Candidates are required to possess knowledge of operating computers, holding proficiency in the technical study can benefit from this course for gaining a higher qualification in M.Phil and Ph.D.

The program holds a greater benefit for students, who after the successful completion of the course can set into lucrative careers in public and private sector companies, MNCs, Aerospace and Automotive, Manufacturing and so on, holding senior-level positions. The average remuneration drawn by graduates of the program ranges between INR 2 to 7 Lacs. This can see a gradual increase with the years of experience and higher qualification.

Top Colleges for Master of Engineering [ME] (Engineering Design)

  • Master of Engineering [ME] (Engineering Design) in Tamil Nadu
  • ME/M.Tech in Delhi-NCR
  • ME/M.Tech in Maharashtra
  • ME/M.Tech in Chennai
  • ME/M.Tech in Uttar Pradesh
  • ME/M.Tech in Telangana

M.E. Engineering Design: Course Highlights

Course levelMasters
Duration2 years
Examination TypeSemester
EligibilityBachelor’s degree in B.Tech or B.E with an aggregate of 60% marks and above from a recognized university or equivalent CGPA.
Admission processMerit List, Entrance examination like GATE, GRE, CAT, CMAT. GD/PI
Course FeeUp to 90,000 to 9 Lacs
Average salaryApprox. Up to 5 Lacs
Top Recruiting CompaniesAutomobile & Automotive sectors, manufacturing, construction and building companies, Colleges/Universities
Job PositionsMechanical Analyst, Mechanical Engineer, Service Engineer, Mechanical Designer

M.E. Engineering Design: What is it About?

M.E. Engineering Design course is an integrated study of understanding the designing disciplines involved in engineering. A comprehensive study of analyzing the problem, reading through the data minutely, later on using the skills acquired through the study, candidates are able to develop or create a solution to meet the need of end consumer. M.E. Engineering Design trains students to gather information and understand logistics, design, formulate the protocol, thereby configure the operations on the computer.

The program aids candidates the necessary skills of problem-solving, sequencing and resolving issues in a professional way. This program gives an opportunity for students to develop required knowledge and gain proficiency in advanced engineering technical courses, which benefits the students who contemplate to pursue research in engineering design.

M.E. Engineering Design curriculum is designed in a manner wherein the students get an in-depth detailing about the subject through classroom study and project work. It provides candidates the required flexibility to broaden their knowledge about specific technical aspects of engineering which can be further useful in conducting research and thesis. This course is especially beneficial for those who are keen on pursuing M.Phil or Ph.D. degree as it entrusts the students a good foundation of the concept and technicalities.

Application of design, problem-solving and analysis happens to be an integrated part of several industries where engineering of new products and technologies is carried on as a continuous process. Graduates of the course are introduced to deeper principles of how engineering products are designed using operational sequencing and processing data. M.E. Engineering Design graduates have wide opportunity to explore their abilities in various Private and Public sector companies, Aerospace and Automotive Industries and so on, wherever designing of products takes place. The overall aim of the program is to instill the students with analytical and leadership skills, imbibe designing skills which would help widen their prospects in career front.

M.E. Engineering Design: Top Colleges & Institutes

Name of InstitutionLocationAverage Course Fee (in INR)
Anna UniversityChennai92,940
Birla Institute of Technology and Science (BITS Pilani) Pilani9,73,000
Coimbatore Institute of Engineering and TechnologyCoimbatore2,62,850
Sri Krishna College of Engineering and TechnologyTamil Nadu90,440
GKM College of Engineering and TechnologyChennai90,440
KS Rangasamy College of TechnologyNammakal1,00,000
Priyadarshini Engineering CollegeVellore90,440
Balaji Institute of Engineering and TechnologyChennai90,440
PSV College of Engineering and TechnologyTamil Nadu1,00,000
Thirumalai College of EngineeringKanchipuram1,00,000
Maharaja Engineering College (MEC)Coimbatore90,000
Einstein College of EngineeringTirunelveli1,00,000

M.E. Engineering Design: Eligibility

Candidates who seek admission for the program of M.E Engineering Design are required to fulfill the following eligibility criteria:

  1. Candidates are supposed to have cleared their degree in B.Tech or B.E with a minimum aggregate of 60% marks and above or an equivalent CGPA.
  2. They are supposed to clear various entrance examinations held at state and national level.
  3. Some colleges may hold Group Discussion and Personal Interview rounds.

M.E. Engineering Design: Admission Process

Candidates who seek admission to M.E Engineering Design course are supposed to qualify their B.Tech or B.E degree with a minimum aggregate of 60% marks and above from a recognized college or institution listed under UGC/AIU. Applicants are supposed to clear the state level and national level examinations like GATE, JEE for seeking entry into the program.

Admissions are done merely on the basis of merit list. Candidates who have been shortlisted after the entrance examination will have to go through the process of Group Discussion and Personal Interview held by the respective colleges to check the credibility and competence of the students through debates and face-to-face interview. The cumulative marks obtained after calculating the overall percentage obtained in the entrance test, GD/PI and degree scores, the process of admission will be furthered. 

The list of entrance examinations held by various reputed colleges and institutions are as follows:

  • GATE (The Graduate Aptitude Test in Engineering)
  • JMET (Joint Management Entrance Test)
  • BITS HD (Birla Institute of Technological Studies Higher Degree Admission Test)
  • NET (National Eligibility Test)

The merit list cut-off is subject to vary for different institutions. Applicants can apply for the program either through offline or online mode from the official college sites. All the information regarding the important dates, names of shortlisted candidates and details of entrance examinations can be checked on the site. The application status of students would be displayed on the site, with the shortlisted candidate being notified through email or on site.

M.E. Engineering Design: Syllabus and Course Description

The syllabus of the program is covered through classroom practice, lab practice and project work. The subjects include the study of the application of electronics in various fields, applied mathematics, computer application in design, Mechanics of material and so on. The major part of the theory is covered in the first year of the program along with lab practice.

The syllabus followed by universities and colleges are as follows:

Semester ISemester II
Advanced Mechanics of MaterialMechanical Behaviour of Materials
Quality Concepts in DesignFinite Element Methods in Mechanical Design
Advanced Numerical MethodsIntegrated Mechanical Design
Vibration Analysis and ControlMechanism Design and Simulation
Computer Application in DesignComposite Material and Mechanics
Design of Material Handling EquipmentOptimization Technology in Design
Lab Practice – CAD-
Semester IIISemester IV
Surface EngineeringProject Work (Phase II)
Plates and Shells-
Tribology in Design-
Project Work (Phase I)-

**Candidates are required to choose from the electives listed which is subject to vary for different institutions and colleges.

M.E. Engineering Design: Career Prospects

M.E. Engineering Design lends the students the necessary skills required in carrying out a complete process of designing engineering equipment, tools and bringing about the necessary changes in implementation. Candidates are qualified in applying the basic and advanced operation techniques to bring in the refinement in tool technicalities of configuring, structuring and controlling operations efficiently.

Candidates after the completion of the course have the opportunity to become lecturers, work in private and public-sector companies, government agencies, construction services, manufacturing sectors and so on, holding top-level positions of Mechanical Engineer, Mechanical Designer, Service Engineer, Instructional Director and other such.

Related M.E. Engineering Design courses

  • M.E. Energy Engineering
  • M.E. Embedded Systems
  • M.E. Machine Design

Read about more Masters in Engineering courses

Some of the jobs options which can be chosen by the graduates after the completion of the course which are as follows:

Job ProfileJob DescriptionAverage Salary (in INR) per annum
Consultant MechanicalDesign structure, develop, manufacture and install tools.4 to 5 lakhs
Mechanical EngineerDesign, develop and process the installation, resolve problems related to the system.5 to 6 lakhs
Service EngineerWork includes supervising the subordinates. Analyzing the service equipment and ensure its maintenance is carried on properly.2 to 3 lakhs
Mechanical DesignerDesign systems using computer-aided design software like AutoCAD, review and resolve changes.3 to 4 lakhs
Site Mechanical EngineerPlan, coordinate and supervise, provide technical advice to staff and prepare reports.3 to 4 lakhs
Instructional DesignerWork involves identifying skills, creating a layout and suggest the changes to be made.4 to 5 lakhs
Lecturer/ProfessorConduct lectures for higher secondary and college level after passing UGC-NET examination2.5 to 5 lakhs
Diploma Professor TraineeWork as trainee professor and lecturers at college and universities.2 to 3 lakhs

PRICE : Not Disclosed






TuteeHUB Protection Service

Protecting both buyers & sellers.

Safely Buy and Sell Courses


Related Colleges All Colleges

Similar Courses All Courses

Recommended For You